Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Richland, MS

Hörmann Opener Circuit Board Replacement in Richland, MS

Failed logic boards and receivers replaced, often after a power surge. Typical cost $175-$400.

Need Hörmann opener circuit board replacement in Richland, MS? We diagnose the problem, give you a price before any work starts, and finish most jobs in a single visit. Failed logic boards and receivers replaced, often after a power surge. We work on Hörmann garage door openers of every age, from older models to current lines, and carry or can source compatible parts.

When to call for Hörmann opener circuit board replacement

  • The opener is completely dead even though it has power
  • It worked until a storm or power surge
  • Random operation or no response to any control
  • Diagnostic lights showing a board fault

What usually causes it

  • Power surges and lightning
  • Heat and moisture damage
  • Age

Before the technician arrives

  • Reset the breaker and try a different outlet.
  • Unplug the opener for a minute, then plug it back in.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Confirm power and rule out sensors and controls
  2. Replace the logic board or receiver
  3. Reprogram remotes
  4. Set the limits and force
  5. Recommend surge protection

On older openers, a new opener can cost about the same as a board and adds current safety and security features.

Typical Hörmann opener circuit board replacement prices

$175-$400Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Hörmann services

Local Hörmann opener circuit board replacement for Richland, MS

A closed garage in a Mississippi summer gets very hot, which shortens the life of opener circuit boards, capacitors and photo-eye sensors. Storms add power surges, so a surge protector is cheap insurance.

Our Hörmann opener circuit board replacement service covers Richland (ZIP code 39218) and nearby towns including Pearl (2.9 mi), Jackson (4.4 mi), Flowood (5 mi) and Florence (6.1 mi). Call (833) 435-8883 to book a visit in Richland.

Hörmann Opener Circuit Board Replacement: frequently asked questions

How much does Hörmann opener circuit board replacement cost in Richland, MS?

Hörmann Opener Circuit Board Replacement typically costs $175-$400 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Hörmann opener circuit board replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Hörmann opener circuit board replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Hörmann warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Mississippi or Richland requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Richland, MS

Overhead Door Garage Door Cable Repair

Overhead Door traces its roots to C.G. Johnson, who invented the upward-acting garage door in 1921. The company builds residential and commercial doors and openers.

Typical $150-$350

Raynor Weather Seal Replacement

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $100-$300

Richards-Wilcox Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

Stanley Garage Door Opener Repair

Stanley garage door openers are no longer made. Compatible remotes and some parts are still available for older units.

Typical $125-$350

Raynor Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Genie Garage Door Opener Repair

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $125-$350

CHI Overhead Doors Weather Seal Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $100-$300

Haas Door Garage Door Track Repair

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $150-$400

Craftsman Garage Door Sensor Repair

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $100-$250

Raynor Garage Door Cable Repair

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $150-$350

Linear Garage Door Opener Installation

Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

Typical $350-$800

Craftsman Garage Door Opener Installation

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $350-$800

Garage door stuck, noisy or broken?

Talk to a garage door technician in Richland, MS now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote